Linux 多 ip docker 指定出口问题

[fangwenxue]

ifconfig 

主 Ip
ens4: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1460
        inet 10.168.0.7  netmask 255.255.255.255  broadcast 10.168.0.7

副 ip
ens5: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1460
        inet 10.120.0.5  netmask 255.255.255.255  broadcast 10.120.0.5
        
配置路由

echo "1 rt1" | sudo tee -a /etc/iproute2/rt_tables
ip route add 10.120.0.1 src 10.120.0.5 dev ens5 table rt1
ip route add default via 10.120.0.1 dev ens5 table rt1
ip rule add from 10.120.0.5/20 table rt1
ip rule add to 10.120.0.5/20 table rt1


docker network create network1 --driver bridge --subnet 192.168.33.0/24
docker network create network2 --driver bridge --subnet 192.168.34.0/24

iptables -t nat -I POSTROUTING -s 192.168.33.0/24 -j SNAT --to-source 10.168.0.7
iptables -t nat -I POSTROUTING -s 192.168.34.0/24 -j SNAT --to-source 10.120.0.5

docker run -d --network network1 --name tm1 <Container Name>
docker run -d --network network2 --name tm2 <Container Name>

tm1 容器网络正常 tm2 容器无法访问网络

[ftfunjth]

echo "1 rt1" | sudo tee -a /etc/iproute2/rt_tables
echo "2 rt2" | sudo tee -a /etc/iproute2/rt_tables

ip rule add from 192.168.33.0/24 table rt1
ip rule add from 192.168.34.0/24 table rt2

ip route add default via 10.168.0.7 ens4 table rt1
ip route add default via 10.120.0.5 ens5 table rt2

docker network create network1 --driver bridge --subnet 192.168.33.0/24
docker network create network2 --driver bridge --subnet 192.168.34.0/24

docker run -d --network network1 --name tm1 <Container Name>
docker run -d --network network2 --name tm2 <Container Name>

[fangwenxue]

@ftfunjth 不好使