PowerShell 实现 RDP 远程桌面防火墙

72 天前
 Qetesh

最近观察系统日志(事件查看器-Windows 日志-安全-事件 ID4625 ),在互联网默认 3389 端口下,每天暴力破解 RDP 账号的次数大约在 1200 次左右

虽然使用强密码,但是微软一直没有实现基于 IP 的自动封锁功能( Windows 11 22H2 后微软启用“帐户锁定阈值”,登录失败 10 次后,封锁账号 10 分钟),仍有暴力破解的风险

通过 chatgpt 及优化后,写了个简单的 PowerShell 脚本,每 60 秒检测 ID4625 日志攻击 IP ,超过 3 次失败,添加到系统防火墙中禁止访问。并实现白名单、控制台输出登录失败 IP 及登录成功 IP

# PowerShell 脚本 - 每分钟检查 RDP 登录失败,并将失败超过 3 次的 IP 阻止
Write-Host -ForegroundColor Green "========================================================================"
Write-Host -ForegroundColor Cyan "  RDP login failure monitoring script has been started"
"  This script checks for RDP login failures every minute and blocks IP that have failed more than 3 times."
Write-Host -ForegroundColor Green "========================================================================"

# 配置变量
$ErrorActionPreference = "SilentlyContinue"
$LogName = "Security"
$EventID = 4625,4624 # Windows 安全事件 ID
$TimeSleepSeconds = 60
$FailedAttempsLimit = 3
$WhiteListIPs = @("127.0.0.1", "172.16.0.110")
$FirewallRuleName = "BlockedRDPAttempt_IPs"
$newBlockIPs = @()
$FailedIPs = @{}
# 初始化首次查询间隔
$startTime = (Get-Date).Add(-(New-TimeSpan -Hours 1))
$endTime = Get-Date

# 创建一个无限循环,每分钟运行一次
while ($true) {
    # 计算时间间隔
    $TimeSpan = $endTime - $startTime
    $startTime = Get-Date

    $Events = Get-WinEvent -FilterHashtable @{
        LogName   = $LogName
        ID        = $EventID
        StartTime = (Get-Date).Add(-$TimeSpan)
    }
    
    # 解析失败的 IP 地址并计算每个 IP 的失败次数
    foreach ($event in $Events) {
        $IpAddress = $event.Properties[19].Value
        if ((![string]::IsNullOrEmpty($IpAddress)) -and ($IpAddress -ne "-") -and ($IpAddress -ne "0")) {
            $FailedIPs[$IpAddress] = $FailedIPs[$IpAddress] + 1
            Write-Host -ForegroundColor Yellow "$(Get-Date) Detected failed login from: $IpAddress at $($event.TimeCreated)"
        }
    }

    # 打印登录成功的 IP 地址
    foreach ($event in $Events) {
        $SuccessIpAddress = $event.Properties[18].Value
        if ((![string]::IsNullOrEmpty($SuccessIpAddress)) -and ($SuccessIpAddress -ne "-") -and ($SuccessIpAddress -ne "0") -and ($event.Properties[8].Value -eq 3)) {
            Write-Host -ForegroundColor Green "$(Get-Date) Detected successful login from: $SuccessIpAddress at $($event.TimeCreated)"
        }
    }
    

    # 过滤出失败次数达到限制的 IP 并进行处理
    $BlockedIPs = $FailedIPs.Keys | Where-Object { $FailedIPs[$_] -ge $FailedAttempsLimit }
    $BlockedIPs = $BlockedIPs | Where-Object { $_ -notin $WhiteListIPs }
    
    if (Compare-Object -ReferenceObject $BlockedIPs -DifferenceObject $newBlockIPs -PassThru) {
        foreach ($ip in $BlockedIPs) {
            # 检查防火墙规则是否存在
            $ruleExists = Get-NetFirewallRule -DisplayName $FirewallRuleName -ErrorAction SilentlyContinue
            
            # 如果规则不存在,则创建一个新规则
            if (-not $ruleExists) {
                New-NetFirewallRule -DisplayName $FirewallRuleName -Direction Inbound -Action Block -RemoteAddress $ip -Protocol TCP -LocalPort 3389
                Write-Host -ForegroundColor Blue "$(Get-Date) Created new Firewall rule for IP: $ip"
            } else {
                # 如果规则已存在,更新规则以添加新 IP
                $existingBlockIPs = (Get-NetFirewallRule -DisplayName $FirewallRuleName | Get-NetFirewallAddressFilter).RemoteAddress
                $newBlockIPs = @()
                $newBlockIPs += $existingBlockIPs
                if ($newBlockIPs -notcontains $ip) {
                    $newBlockIPs += $ip
                    Write-Host -ForegroundColor Red "$(Get-Date) Detected IP with multiple RDP failures: $ip"
                }
                Set-NetFirewallRule -DisplayName $FirewallRuleName -RemoteAddress $newBlockIPs
            }
        }
        if (![string]::IsNullOrEmpty($newBlockIPs)) {
            Write-Host -ForegroundColor Red "$(Get-Date) Updated Firewall rule to add IP: $newBlockIPs"
        }
    }
    # 等待 60 秒后继续下一轮循环
    Start-Sleep -Seconds $TimeSleepSeconds

    # 结束时间戳
    $endTime = Get-Date
}

https://github.com/Qetesh/rdpFail2Ban

可从 GitHub 下载,或复制代码到 ps1 文件,使用管理员权限终端运行 ps1 程序

最后希望 RDP 永远不会中毒~

1806 次点击
所在节点    Windows
14 条回复
HenryHe613
72 天前
大力支持!但是,为什么不把端口改一下呢?这样能减少很多爆破了
CloudMx
72 天前
1 、端口改改
2 、用户名改改
随它破
realJamespond
72 天前
套一层 ssh
AliceFizzy
72 天前
好像已经有 wail2ban 了,不过还是支持自己造轮子
cc666
72 天前
套 ssh+1
LiYanHong
72 天前
lsearsea
72 天前
v6 没有爆破记录
hez2010
72 天前
其实可以参考这篇文章给你的 RDP 添加多因素认证,这样就算破解进来了一样要输入动态口令才能访问: https://inc.sysu.edu.cn/article/1050
idragonet
72 天前
何必了,使用端口转发+直接 IP 白名单。
Autonomous
71 天前
从来不敢把 22 ,3389 之类的端口向公网开放,在网关路由上还专门屏蔽掉了。
PrinceofInj
71 天前
只要使用微软账号这一个方式,就可以隔绝 99.9999%的爆破了。
wheat0r
71 天前
套 ssh ,不仅防爆破,还防漏洞
Qetesh
71 天前
@lsearsea 我在 Windows 11 23H2 可以看到 IPv6 ,也可以更新防火墙策略。方便告知下系统版本,我测试下

端口其实有换的,但我有个五位数 RDP 端口也有在被扫描,但扫描数确实少

@hez2010 感谢补充,这个有试过,安全性应该是没啥问题的

我现在主要用的是 WireGuard ,很方便,安全、速度、稳定性也都是可以的
lsearsea
70 天前
就 win10

这是一个专为移动设备优化的页面(即为了让你能够在 Google 搜索结果里秒开这个页面),如果你希望参与 V2EX 社区的讨论,你可以继续到 V2EX 上打开本讨论主题的完整版本。

https://www.v2ex.com/t/1019147

V2EX 是创意工作者们的社区,是一个分享自己正在做的有趣事物、交流想法,可以遇见新朋友甚至新机会的地方。

V2EX is a community of developers, designers and creative people.

© 2021 V2EX