如意云固件分享: RY-1 的 OpenWrt 的 trunk 固件 Ver: OpenWrt Chaos Calmer r44245 / LuCI (git-15.030.11829-7952ad5)

[shangjiyu]

貌似很少有人做这个固件了? 前些天有人找我问, 我就顺便放一个出来

固件地址Dropbox: https://www.dropbox.com/s/837riw7mbwpn23k/openwrt-ramips-mt7620-ry-1-squashfs-sysupgrade.bin?dl=0

固件包含了shadosocks, chinadns, dns2sock, dnscypt-proxy redsocks2 privoxy 迅雷远程,全功能aria2等

最终解释权归本人所有(听说这句话没有法律效应)
disclaimer: 请正确刷入固件,刷坏我也没有办法(刷的坏才怪)...

[tyhunter]

LZ你好，我刷了你的固件之后，发现shadowsocks始终无法启动，试着用SSH连接路由器后手动开启SS也是没有反应，这是什么原因？

[shangjiyu]

@tyhunter 看下日志歪,

[tyhunter]

@shangjiyu dnsmasq和SS都没办法使用
Fri Mar 27 18:10:32 2015 daemon.info dnsmasq[2929]: reading /tmp/resolv.conf.auto
Fri Mar 27 18:10:32 2015 daemon.info dnsmasq[2929]: using local addresses only for domain lan
Fri Mar 27 18:10:32 2015 daemon.info dnsmasq[2929]: using nameserver 10.80.96.250#53
Fri Mar 27 18:10:32 2015 daemon.info dnsmasq[2929]: using nameserver 202.96.104.17#53
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: starting ssh (count 1)
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh child pid is 5727
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: starting ssh (count 2)
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh child pid is 5729
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: starting ssh (count 3)
Fri Mar 27 18:10:32 2015 user.info autossh[5723]: ssh child pid is 5731
Fri Mar 27 18:10:32 2015 user.notice firewall: Reloading firewall due to ifup of wan (pppoe-wan)
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: starting ssh (count 4)
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh child pid is 5756
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: starting ssh (count 5)
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh child pid is 5757
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: starting ssh (count 6)
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh child pid is 5758
Fri Mar 27 18:10:33 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:35 2015 daemon.info privoxy[3180]: Restart request due to 'ifup' of interface 'wan'
Fri Mar 27 18:10:35 2015 user.info autossh[5723]: starting ssh (count 7)
Fri Mar 27 18:10:35 2015 user.info autossh[5723]: ssh child pid is 5840
Fri Mar 27 18:10:35 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:10:36 2015 daemon.notice privoxy[3180]: Shutdown successfully
Fri Mar 27 18:10:38 2015 daemon.notice privoxy[6090]: Started successfully
Fri Mar 27 18:10:38 2015 user.notice ddns-scripts[6108]: myddns_ipv4: PID '6108' started at 2015-03-27 18:10
Fri Mar 27 18:10:38 2015 user.warn ddns-scripts[6108]: myddns_ipv4: Service section disabled! - TERMINATE
Fri Mar 27 18:10:38 2015 user.warn ddns-scripts[6108]: myddns_ipv4: PID '6108' exit WITH ERROR '1' at 2015-03-27 18:10\n
Fri Mar 27 18:10:43 2015 user.info autossh[5723]: starting ssh (count 8)
Fri Mar 27 18:10:43 2015 user.info autossh[5723]: ssh child pid is 6159
Fri Mar 27 18:10:43 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh
Fri Mar 27 18:11:01 2015 user.info autossh[5723]: starting ssh (count 9)
Fri Mar 27 18:11:01 2015 user.info autossh[5723]: ssh child pid is 6267
Fri Mar 27 18:11:01 2015 user.info autossh[5723]: ssh exited with error status 1; restarting ssh

[shangjiyu]

@tyhunter .... 一点有用的信息都没有... 你先关闭不需要的程序(autossh, privoxy 等等), 然后重启ss 看下log... (可能没有/etc/ipset 这个目录..) dnsmasq的话 默认是启用chinadns的(忽然发现默认配置里面有个172.16.7. 的内网ip... 失误)
折腾还是需要点知识的..

[yuhaaitao]

多谢，原来如意云1还可以刷这么多功能

[ivyswen]

我用你最新的补丁编译出来了，但是lan口、USB的灯都不亮。但是在luci里讲lan1-4、USB分别指向别的设备是可以亮的。

配置如下


config led 'led_power'
option name 'power'
option default '1'
option sysfs 'dteam:red:power'

config led 'led_wan'
option name 'wan'
option default '0'
option sysfs 'dteam:red:wan'
option trigger 'heartbeat'

config led 'led_wifi_led'
option name 'wifi'
option trigger 'netdev'
option mode 'link tx rx'
option default '0'
option dev 'ra0'
option sysfs 'dteam:red:wifi'

config led 'led_usb'
option name 'USB'
option trigger 'usbdev'
option dev '1-1'
option interval '50'
option sysfs 'dteam:red:usb'
option default '0'

[hero18688]

LZ你好，我用的型号是zbt-wa05，看上去led数量和分布跟如意云一样，但我把flash从8m改成16m后系统灯 无线灯就不亮了，请教下你是怎么修改的

[hero18688]

刷过楼主的固件里，网线插哪个口都是wan灯亮，其他不亮，但是通过gpio命令，网口灯都可以设置亮灭的，是因为每个灯没有关联到对应网口吗？希望修正

我看到如意云官方固件插拔网线会有对应网口提示
[ 68.390000] ESW: Link Status Changed - Port3 Link UP
[ 69.260000] ESW: Link Status Changed - Port3 Link Down
[ 73.370000] ESW: Link Status Changed - Port2 Link UP
[ 74.240000] ESW: Link Status Changed - Port2 Link Down
楼主固件没有。

[stcode]

RY-1刚刷了，无线设置页面打不开，提示网关错误，

[shangjiyu]

@stcode https://dev.openwrt.org/ticket/19768#comment:1
fixed 7 hours ago...

[stcode]

@shangjiyu 那我重刷试试。

[stcode]

@shangjiyu RY-1刷了，基本正常，无线发射速率最高只有54 Mbit/s，还有无线那个信道没有12，13，有时会出现12，13信道选择项，但是选择保存之后，无线就会关闭。辛苦了，

[stcode]

对比了几个固件才发现,原来楼主编译的是RY-1A这个型号,难怪无线只有54MB呢,无线驱动不匹配,
楼主能否帮忙帮忙编译一个RY-1的固件,配置了好久的编译环境都不成功.先谢谢了