山东联通家用宽带成功接入 IPv6,哈哈哈

2018-08-31 14:44:12 +08:00
 zwhfly
山东一百零八线农村,联通光纤宽带,获取到了 /60 地址段。

IPv4 WAN 状态

pppoe-wan 类型: pppoe
地址: xxx.xxx.xxx.xxx
子网掩码: 255.255.255.255
网关: xxx.xxx.xxx.xxx
DNS 1: 202.102.134.68
DNS 2: 202.102.128.68
已连接: 17h 51m 15s
IPv6 WAN 状态

pppoe-wan 类型: dhcpv6-pd
Prefix Delegated: 2408:8214:xx1x:xxxx::/60
地址: 2408:8214:xx0x:xxxx:xxxx:xxxx:xxxx:xxxx/64
网关: fe80::xxxx:xxxx:xxxx:xxxx
DNS 1: 2408:8899::8
DNS 2: 2408:8888::8
已连接: 17h 51m 4s
25257 次点击
所在节点    宽带症候群
81 条回复
happylty
2018-08-31 14:48:03 +08:00
直连光猫的? 推荐个支持 ipv6 的路由器呗,不要贵的。。。
yexm0
2018-08-31 14:51:32 +08:00
@happylty 去闲鱼啥的淘个二手华硕路由
ResidualBlood
2018-08-31 15:13:07 +08:00
那么问题来了,网速怎么样?
121121121
2018-08-31 15:31:44 +08:00
@happylty 可以刷 opwnwrt 都可以
zwhfly
2018-08-31 15:38:27 +08:00
@happylty 我的光猫是桥接模式,用的 MW4530R 刷的 OpenWrt 拨号。
淘宝二手 WDR4310 只要 50 块,性价比炸裂。
nowheretoseek
2018-08-31 16:05:32 +08:00
@zwhfly WDR4310 刷 OpenWrt 支持 V6 是吗?
zro
2018-08-31 16:07:32 +08:00
v4 是公网还是内网?
zhangjn
2018-08-31 16:08:29 +08:00
楼主你们那里的 ipv6 是从拨号后的 pppoe-wan 上面的获取的还是从物理接口 eth1 上面获取的呢
zwhfly
2018-08-31 16:49:50 +08:00
@ResidualBlood
带宽没找到能用的 IPv6 测速网站。

延迟:

>tracert 2600::

通过最多 30 个跃点跟踪
www.sprint.net [2600::] 的路由:

1 <1 毫秒 <1 毫秒 <1 毫秒 2408:xxxx:xxxx:xxxx::1
2 6 ms 3 ms 3 ms 2408:xxxx:xxxx:xxxx::1
3 9 ms 3 ms 3 ms 2408:xxxx:xxxx:xxxx::2
4 20 ms 17 ms 17 ms 2408:xxxx:xxxx:xxxx::2
5 20 ms 17 ms 17 ms 2408:xxxx:xxxx:xxxx::
6 22 ms 19 ms 19 ms 2408:xxxx:xxxx:xxxx::1
7 * * * 请求超时。
8 168 ms 167 ms 167 ms 2408:8000:2:6c9::1
9 213 ms 212 ms 205 ms 2600:80a:16f::79
10 273 ms 286 ms 277 ms 2600:80a::1f
11 273 ms 281 ms 279 ms 2600:80a:2::2
12 226 ms 264 ms 279 ms 2600:0:2:1239:144:232:17:39
13 289 ms 259 ms 234 ms sl-crs1-ria-bu-1.v6.sprintlink.net [2600:0:2:1239:144:232:2:85]
14 213 ms 211 ms 211 ms sl-crs1-fw-be2.v6.sprintlink.net [2600:0:2:1239:144:232:13:80]
15 238 ms 238 ms 233 ms sl-crs1-atl-be8.v6.sprintlink.net [2600:0:2:1239:144:232:22:226]
16 222 ms 223 ms 224 ms sl-crs1-ffx-be3.v6.sprintlink.net [2600:0:2:1239:144:232:13:13]
17 230 ms 227 ms 226 ms sl-crs1-orl-be12.v6.sprintlink.net [2600:0:2:1239:144:232:17:43]
18 228 ms 227 ms 226 ms sl-lkdstr2-p1-0.v6.sprintlink.net [2600:0:3:1239:144:223:33:32]
19 228 ms 229 ms 228 ms www.sprint.net [2600::]

跟踪完成。

>tracert ipv6.test-ipv6.com

通过最多 30 个跃点跟踪
ipv6.test-ipv6.com [2001:470:1:18::4:230] 的路由:

1 <1 毫秒 <1 毫秒 <1 毫秒 2408:xxxx:xxxx:xxxx::1
2 3 ms 2 ms 4 ms 2408:xxxx:xxxx:xxxx::1
3 3 ms 3 ms 3 ms 2408:xxxx:xxxx:xxxx::2
4 18 ms 17 ms 17 ms 2408:xxxx:xxxx:xxxx::2
5 19 ms 18 ms 20 ms 2408:xxxx:xxxx:xxxx::
6 20 ms 23 ms 19 ms 2408:xxxx:xxxx:xxxx::1
7 * * * 请求超时。
8 165 ms 167 ms 167 ms 2408:8000:2:6bf::1
9 192 ms 190 ms 191 ms 2600:80a:16f::79
10 280 ms 248 ms 288 ms 2600:80a::1f
11 265 ms 265 ms 274 ms 2600:80a:2::e
12 168 ms 169 ms 168 ms 100ge8-2.core1.sjc2.he.net [2001:470:0:2b7::1]
13 168 ms 171 ms 169 ms 10ge1-1.core1.fmt1.he.net [2001:470:0:2f::1]
14 170 ms 170 ms 171 ms vm0.test-ipv6.com [2001:470:1:18::4:230]

跟踪完成。

>tracert cnnic.com.cn

通过最多 30 个跃点跟踪
cnnic.com.cn [2001:dc7:dd01:0:218:241:97:42] 的路由:

1 <1 毫秒 <1 毫秒 <1 毫秒 2408:xxxx:xxxx:xxxx::1
2 3 ms 3 ms 3 ms 2408:xxxx:xxxx:xxxx::1
3 4 ms 4 ms 3 ms 2408:xxxx:xxxx:xxxx::2
4 * * * 请求超时。
5 * * * 请求超时。
6 17 ms 17 ms 32 ms 2408:xxxx:xxxx:xxxx::3
7 17 ms 19 ms 20 ms 2408:xxxx:xxxx:xxxx::3
8 * * * 请求超时。
9 17 ms 16 ms 17 ms 2408:80e0:4000:3::2
10 21 ms 23 ms 26 ms 2001:dc7:ddff::6
11 19 ms 22 ms 21 ms 2001:dc7:dd01:0:218:241:97:42

跟踪完成。

>tracert ipv6.ustc.edu.cn

通过最多 30 个跃点跟踪
revproxy.ustc.edu.cn [2001:da8:d800:642::248] 的路由:

1 <1 毫秒 <1 毫秒 <1 毫秒 2408:xxxx:xxxx:xxxx::1
2 31 ms 3 ms 20 ms 2408:xxxx:xxxx:xxxx::1
3 13 ms 4 ms 4 ms 2408:xxxx:xxxx:xxxx::2
4 * * * 请求超时。
5 26 ms 27 ms 27 ms 2408:xxxx:xxxx:xxxx::
6 27 ms 27 ms 26 ms 2408:xxxx:xxxx:xxxx::1
7 36 ms 39 ms 39 ms 2408:8000:3::cf
8 33 ms 33 ms 33 ms 2001:da8:257:0:101:4:7:1001
9 36 ms 39 ms 39 ms 2001:da8:257:0:101:4:67:d
10 38 ms 40 ms 36 ms 2001:da8:257:0:101:4:16:2a
11 53 ms 34 ms 35 ms 2001:da8:257:0:101:4:1:1
12 35 ms 35 ms 35 ms 2001:da8:257:0:101:4:113:52
13 34 ms * 36 ms 2001:da8:257:0:101:4:19:152
14 205 ms 207 ms 207 ms 2001:da8:2:701::1
15 218 ms 218 ms 218 ms 2001:da8:2:1::2
16 225 ms 220 ms 220 ms 2001:da8:2:d::1
17 227 ms 227 ms 227 ms 2001:da8:2:e::2
18 228 ms 230 ms 227 ms 2001:da8:1:514::2
19 233 ms 233 ms 232 ms 2001:da8:b3:fa02::1
20 234 ms 241 ms 246 ms 2001:da8:b3:101::10
21 226 ms 226 ms 228 ms 2001:da8:d800:642::248

跟踪完成。
zwhfly
2018-08-31 16:51:58 +08:00
@nowheretoseek 支持。
P.S. OpenWrt 最新版( OpenWrt 18.06 )最近已经发布了。
zwhfly
2018-08-31 16:52:27 +08:00
@zro 公网,以前是,现在也是。
zwhfly
2018-08-31 16:56:31 +08:00
@ResidualBlood 不过用一台江苏移动 LTE 手机走纯 IPv6 网络连到我家里内网一台电脑的 RDP 远程桌面,感觉挺流畅的。
以后普及 IPv6 的时候,神马“ TeamViewer ”,神马“蒲公英”,基本就没什么必要了,哈哈!
zwhfly
2018-08-31 17:00:36 +08:00
@zhangjn pppoe-wan
实际上在 Web 界面是在“ WAN6 ”接口配置的,我的理解“ WAN6 ”是 WAN(pppoe-wan)的衍生接口。
yexm0
2018-08-31 17:16:30 +08:00
@zwhfly 中国联通的官网是 www.chinaunicom.cn 或者.com
中国电信的官网是 www.chinatelecom.com.cn
中国移动的 www.10086.cn
三大全部支持 ipv6 访问
zro
2018-08-31 17:21:47 +08:00
@zwhfly #11 貌似是唯一一家提供 v4, v6 双公网 IP 的 ISP
zwhfly
2018-08-31 17:22:17 +08:00
@yexm0 好吧,试了下 www.chinaunicom.com ,确实解析了

root@LEDE:~# nslookup -query=AAAA www.chinaunicom.com
Server: 127.0.0.1
Address: 127.0.0.1#53

Non-authoritative answer:
www.chinaunicom.com has AAAA address 2408:877e:10::2
liangzi
2018-08-31 17:26:06 +08:00
IPV6 能翻吗?
zwhfly
2018-08-31 17:28:54 +08:00
@zro #15 光纤到户,双公网 IP,200M 下行,才¥400 一年,怕不怕!
我们那里太穷了,再贵一点就没人用了。然后我就乐死了。:)
zwhfly
2018-08-31 17:29:44 +08:00
@liangzi 试了下 google 和 youtube,能解析,但打不开,https 也打不开。
zro
2018-08-31 17:38:59 +08:00
@zwhfly #19 TCP 阻断,不知要啥技术可破

这是一个专为移动设备优化的页面(即为了让你能够在 Google 搜索结果里秒开这个页面),如果你希望参与 V2EX 社区的讨论,你可以继续到 V2EX 上打开本讨论主题的完整版本。

https://www.v2ex.com/t/484936

V2EX 是创意工作者们的社区,是一个分享自己正在做的有趣事物、交流想法,可以遇见新朋友甚至新机会的地方。

V2EX is a community of developers, designers and creative people.

© 2021 V2EX