刚刚到货的官翻 m1 air，这个磁盘数据正常么

[among]

刚刚到货的官翻 m1 air ，这个磁盘数据正常吗。

到手在线升级了一下小版本，装了几个软件。

among@mymac ~ % smartctl -a /dev/disk0
smartctl 7.3 2022-02-28 r5338 [Darwin 21.6.0 arm64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       APPLE SSD AP0512Q
Serial Number:                      0ba016ebc4181c1d
Firmware Version:                   387.140.
PCI Vendor/Subsystem ID:            0x106b
IEEE OUI Identifier:                0x000000
Controller ID:                      0
NVMe Version:                       <1.2
Number of Namespaces:               3
Local Time is:                      Sat Oct  1 10:29:11 2022 CST
Firmware Updates (0x02):            1 Slot
Optional Admin Commands (0x0004):   Frmw_DL
Optional NVM Commands (0x0004):     DS_Mngmt
Maximum Data Transfer Size:         256 Pages

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     0.00W       -        -    0  0  0  0        0       0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        33 Celsius
Available Spare:                    100%
Available Spare Threshold:          99%
Percentage Used:                    0%
Data Units Read:                    1,193,991 [611 GB]
Data Units Written:                 981,039 [502 GB]
Host Read Commands:                 21,007,799
Host Write Commands:                8,648,014
Controller Busy Time:               0
Power Cycles:                       210
Power On Hours:                     7
Unsafe Shutdowns:                   40
Media and Data Integrity Errors:    0
Error Information Log Entries:      0

Read 1 entries from Error Information Log failed: GetLogPage failed: system=0x38, sub=0x0, code=745

[czhu]

用了四年的 MacBook Pro ，日均使用 10 小时+

Data Units Read: 131,925,664 [67.5 TB]
Data Units Written: 113,428,816 [58.0 TB]
Power Cycles: 206
Power On Hours: 2,350

[zggsong]

放心 前面比较快 后面就稳定多了 我也是官方，到手几天就 1T 了 Data Units Read: 6,569,748 [3.36 TB]
Data Units Written: 7,308,816 [3.74 TB]
Host Read Commands: 180,805,738

[zggsong]

@zggsong 现在 4 个月也就这么多

[dym]

我的一年多，80T 读写

[HamHam]

正常

[Huskylee]

2015 款 MBP 使用至今，打算自己动手换 1T 固态
smartctl 7.3 2022-02-28 r5338 [Darwin 21.6.0 x86_64] (sf-7.3-1)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Apple SD/SM/TS...E/F/G SSDs
Device Model: APPLE SSD SM0256G
Serial Number: S29CNYBGC32056
LU WWN Device Id: 5 002538 900000000
Firmware Version: BXW1SA0Q
User Capacity: 251,000,193,024 bytes [251 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: In smartctl database 7.3/5319
ATA Version is: ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Oct 6 03:39:54 2022 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x001a 200 200 000 Old_age Always - 0
5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 6183
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 3155
169 Unknown_Apple_Attrib 0x0013 205 205 010 Pre-fail Always - 2379499963328
173 Wear_Leveling_Count 0x0032 191 191 100 Old_age Always - 317846192285
174 Host_Reads_MiB 0x0022 099 099 000 Old_age Always - 16722839
175 Host_Writes_MiB 0x0022 099 099 000 Old_age Always - 18748960
192 Power-Off_Retract_Count 0x0012 099 099 000 Old_age Always - 82
194 Temperature_Celsius 0x0022 073 023 000 Old_age Always - 27 (Min/Max 10/77)
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x001a 200 200 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.