V2EX = way to explore
V2EX 是一个关于分享和探索的地方
现在注册
已注册用户请  登录
Distributions
Ubuntu
Fedora
CentOS
中文资源站
网易开源镜像站
chenyaobin7
V2EX  ›  Linux

sentos6.3安装成功了,但是没有无线网络,如何才能搞定

  •  
  •   chenyaobin7 · 2013-03-17 15:21:14 +08:00 · 5031 次点击
    这是一个创建于 4030 天前的主题,其中的信息可能已经有所发展或是发生改变。
    sentos6.3安装成功了,但是没有无线网络,如何才能搞定。

    http://blog.csdn.net/chinawangyajun/article/details/7610862 我按照这个步骤下来,到

    # make -C /lib/modules/`uname -r`/build/ M=`pwd 提示没有规则可创建目标‘uname’
    10 条回复    1970-01-01 08:00:00 +08:00
    chenyaobin7
        1
    chenyaobin7  
    OP
       2013-03-17 15:29:45 +08:00
    提示是 没有那个文件或者目录 不是上面的提示
    chenyaobin7
        2
    chenyaobin7  
    OP
       2013-03-17 15:33:57 +08:00
    make: *** /lib/modules/"release"/build: No such file or directory. Stop.

    Then you do not have the proper packages installed, since installing the
    proper packages will create /lib/modules/"release"/build on your system 找到了 看来帮助文件很有用,可惜阴文太差
    chenyaobin7
        3
    chenyaobin7  
    OP
       2013-03-17 16:20:41 +08:00
    求助啊,有这个解释,但是我还是解决不乐儿问题啊
    monkeydev
        4
    monkeydev  
       2013-03-17 16:21:31 +08:00
    @chenyaobin7 标题错了。。。
    还是我打开方式不对。。。
    swulling
        5
    swulling  
       2013-03-17 16:23:10 +08:00
    centos主攻服务器系统啊,你桌面装这个。。

    P.S. 不要就照着教程来,要先理解这个教程做了什么,如果不能理解,请不要做
    cassyfar
        6
    cassyfar  
       2013-03-17 16:45:53 +08:00
    感觉你这句make命令都没懂...
    你先打uname -r,看下你的linux kernel的version,然后ls下/lib/modules里有这个路径不。应该是没有的,然后你mkdir -p /lib/modules/`uname -r`/build/ 创建一个这个路径。

    最后强烈建议你先在虚拟机里装,这样不需要一上来就要解决这些折腾人的问题。
    @swulling 说得很对,Centos是做服务器,你这整得,折腾不。
    ioiioi
        7
    ioiioi  
       2013-03-18 00:07:35 +08:00
    我今天才玩了一把wireless on centos,不过芯片跟你的不一样,供参考:
    ioiioi
        8
    ioiioi  
       2013-03-18 00:08:28 +08:00
    有一块古老的贝尔金pci无线网卡,芯片是AR2413/AR2414:

    [root@bw-control network-scripts]# lspci
    ...
    11:00.0 Ethernet controller: Atheros Communications Inc. AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg] (rev 01)
    ...

    好在centos5.8能认出来,并自动加载了ath5k驱动
    [root@bw-control network-scripts]# dmesg | grep ath5k
    ath5k 0000:11:00.0: registered as 'phy0'
    ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)

    因此该无线网卡可以在centos5中使用

    [root@bw-control network-scripts]# ifup wlan0
    [root@bw-control network-scripts]# iwlan wlan0 scan

    通过该命令可找到欲附着的AP ssid

    接着通过wpa_passphase生成基本的配置文件

    [root@bw-control network-scripts]# wpa_passphase jk_hangye <passphase> > /etc/sysconfig/network-scripts/wpa.conf

    然后通过wpa_supplicant附着到AP

    [root@bw-control network-scripts]# wpa_supplicant -Dwext -iwlan0 -cwpa.conf
    (wext) Device wlan0 kernel driver name: ath5k.
    Device wlan0 kernel driver name: ath5k.
    ioctl[SIOCSIWAUTH]: Operation not supported
    WEXT auth param 4 value 0x0 - Trying to associate with c8:d3:a3:32:ba:96 (SSID='jk_hangye' fr
    eq=2457 MHz)
    Associated with c8:d3:a3:32:ba:96
    WPA: Key negotiation completed with c8:d3:a3:32:ba:96 [PTK=CCMP GTK=TKIP]
    CTRL-EVENT-CONNECTED - Connection to c8:d3:a3:32:ba:96 completed (auth) [id=0 id_str=]

    看似有问题,实则OK

    [root@bw-control network-scripts]# dmesg | less
    ...
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    wlan0: direct probe to AP c8:d3:a3:32:ba:96 (try 1)
    wlan0: deauthenticating from c8:d3:a3:32:ba:96 by local choice (reason=3)
    wlan0: direct probe to AP c8:d3:a3:32:ba:96 (try 1)
    wlan0: direct probe to AP c8:d3:a3:32:ba:96 (try 2)
    wlan0: direct probe responded
    wlan0: authenticate with AP c8:d3:a3:32:ba:96 (try 1)
    wlan0: authenticated
    wlan0: associate with AP c8:d3:a3:32:ba:96 (try 1)
    wlan0: RX AssocResp from c8:d3:a3:32:ba:96 (capab=0x431 status=0 aid=6)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    padlock: VIA PadLock not detected.
    wlan0: no IPv6 routers present
    ...

    需要注意的事,wpa_supplicant只是将无线网卡附着到AP,并通过wpa1/2的认证,dhcp尚未开启,因此还需要:

    [root@bw-control network-scripts]# dhclient wlan0
    Internet Systems Consortium DHCP Client V3.0.5-RedHat
    Copyright 2004-2006 Internet Systems Consortium.
    All rights reserved.
    For info, please visit http://www.isc.org/sw/dhcp/

    Listening on LPF/wlan0/00:11:50:d3:bd:93
    Sending on LPF/wlan0/00:11:50:d3:bd:93
    Sending on Socket/fallback
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 (xid=0x40a739ed)
    DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 10 (xid=0x40a739ed)
    DHCPOFFER from 192.168.1.1
    DHCPREQUEST on wlan0 to 255.255.255.255 port 67 (xid=0x40a739ed)
    DHCPACK from 192.168.1.1 (xid=0x40a739ed)
    bound to 192.168.1.106 -- renewal in 39511 seconds.


    从而获得IP地址,实现无线网卡的完整接入。
    bwlinux
        9
    bwlinux  
       2013-03-18 09:12:23 +08:00   ❤️ 1
    LZ首先要说,自己是用的什么无线网卡。不是所有的无线网卡都有LInux驱动的。google 网卡的型号+linux,肯定有答案。
    如果LZ安装了桌面,应该是自带无线的管理软件,用那个软件,无线网卡的管理方便很多,不需要象LS,折腾这么多命令。。
    在terminal下,ifconfig -a看看无线网卡的界面有没有。
    没有的话,安装无线网卡的驱动,另外还需要安装firmware,(不是GPL的firmware,都是需要用户自己安装的,安装驱动的时候,不会安装的)
    chenyaobin7
        10
    chenyaobin7  
    OP
       2013-03-18 20:32:55 +08:00
    问题已经解决,我装上了这个80211的驱动了!太佩服自己了!
    关于   ·   帮助文档   ·   博客   ·   API   ·   FAQ   ·   我们的愿景   ·   实用小工具   ·   5364 人在线   最高记录 6543   ·     Select Language
    创意工作者们的社区
    World is powered by solitude
    VERSION: 3.9.8.5 · 26ms · UTC 07:29 · PVG 15:29 · LAX 00:29 · JFK 03:29
    Developed with CodeLauncher
    ♥ Do have faith in what you're doing.